Circuit/System Verification
WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Engine idling in Park, with parking brake applied and drive wheels chocked.
- Perform the Transmission Fluid Level and Condition Check to verify correct fluid level and condition.
- Perform the Road Test . Verify the transmission operation performs as indicated, in the road test instructions.
- Review the scan tool snapshot transmission data parameters. Verify the engine and transmission data parameters display the correct values in all forward gear ranges:
- Engine Speed
- Transmission ISS
- Transmission OSS
- Vehicle Speed
- Shift Solenoid 1
- TFP Switches
- Operate the vehicle within the Condition for Running the DTC to verify the DTC does not reset. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records data.
NOTE:
If other DTCs are set, diagnose those DTCs first.
NOTE:
Perform a scan tool snapshot, during the road test.