LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1733 (Automatic Transmission - 6L45/6L50/6L80/6L90 - DTC P0218 To DTC P0974) >> DTC P071A >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON, cycle the Tow/Haul switch while observing the Tow/Haul switch parameter on the scan tool in the Transmission Controls Data list. The Tow/Haul switch parameter should change states from NO to YES, or YES to NO with each cycle of the switch.
  2. Operate the vehicle within the Conditions for Running the DTC to verify that the DTC does not reset. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records.
scientia non olet · About LEMON Manuals