Conditions for Running the DTC
WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
P0711
- DTCs P0101, P0102, P0103, P0116, P0117, P0118, P0121, P0122, P0123, P0336, P0337, P0338, P0711, P0716, P0722, P0723, P0742, or P2726 are not set.
- Ignition voltage is 8.6 volts or greater.
- The engine coolant temperature (ECT) is valid.
- The TCM internal temperature is -50°C to +170°C (-56°F and +336°F) at start up.
- The engine speed is 500 RPM or greater for 5 seconds.
- The vehicle speed is 8 km/h (5 mph) or greater for 5 minutes.
- The engine coolant temperature is between -39°C and 149°C (-38°F and 300°F).
- The accelerator pedal position signal is valid.
- The engine torque signal is valid.
P0712 or P0713
- DTCs P0712, P0713, P0716, P0717, P0722, or P0723 are not set.
- Ignition voltage is 8.6 volts or greater.
- The engine speed is 500 RPM or greater for 5 seconds.