Circuit/System Verification
WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition ON, verify with a scan tool the high side driver 1 parameter displays ON.
- Engine Running, gear selector lever in Park position. Verify with a scan tool the following test status parameters displays OK:
- High Side Driver 1 Circuit High Voltage Test Status
- High Side Driver 1 Circuit Open Test Status
- High Side Driver 1 Circuit Low Voltage Test Status
- Operate the vehicle within the Conditions for Running the DTC to verify the DTC does not reset. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records data.