LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1704 (Wiring Systems And Power Management - Component Connector End Views - 1-C) >> Component Connector End Views - 1 Through C >> Camshaft Position (CMP) Actuator Solenoid Valve (LZ1, LY6, L96 or L9H)

Camshaft Position (CMP) Actuator Solenoid Valve (LZ1, LY6, L96 or L9H)

WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Camshaft Position (CMP) Actuator Solenoid Valve (LZ1, LY6, L96 or L9H)
GM1673477Courtesy of GENERAL MOTORS CORP.
Camshaft Position (CMP) Actuator Solenoid Valve (LZ1, LY6, L96 or L9H)

Pin Wire Circuit Function
1 0.35 TN 2199 Low Reference
2 0.35 PU 5284 Camshaft Actuator Solenoid Control
Connector Part Information 
  • Harness: Camshaft Position Sensor Jumper
  • OEM: 15472554
  • Service: 88988610
  • Description: 2-Way F 0.64 Series, Sealed (BK)
Terminal Part Information 
  • Terminal/Tray: 1393364-2/7
  • Core/Insulation Crimp: K/K
  • Release Tool/Test Probe: 15315247/J-35616-64B (L-BU)