Hybrid Low, 1-2 Clutch Piston Installation

WARNING: This page is about a different car, the 2010 GMC Sierra and 2010 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Hybrid Low, 1-2 Clutch Piston

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	Hybrid Low, 1-2 Clutch Piston
2	Hybrid Low, 1-2 Clutch Return Spring Assembly
3	Hybrid Low, 1-2 Clutch Plate - Waved
4	Hybrid Low, 1-2 Clutch Plate
5	Hybrid Low, 1-2 Clutch Plate Assembly
6	Hybrid Low, 1-2 Clutch Backing Plate Assembly Tip: Make sure to install with lip facing up, see orientation.
7	Hybrid Low, 1-2 Clutch Piston Retaining Ring Tip: Install a NEW retaining ring. Do not reuse the old retaining ring. Start retaining ring at one end, work around to the other end. Special Tool: J-46632 Spring Compressor. See Special Tools .