Holding Fixture Removal and Torque Dampener Installation

WARNING: This page is about a different car, the 2010 GMC Sierra and 2010 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Holding Fixture & Torque Dampener

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	A/Trans Torque Dampener Assembly Special Tool: J 21366 Cnverter Holding Strap
2	A/Trans Case Assembly Special Tools DT-48307 Holding Fixture. See Special Tools . J 3289-20 Holding Fixture Base Assembly. See Special Tools .

Callout

Component Name

A/Trans Torque Dampener Assembly
Special Tool:
J 21366 Cnverter Holding Strap

A/Trans Case Assembly

Special Tools

DT-48307 Holding Fixture. See Special Tools .
J 3289-20 Holding Fixture Base Assembly. See Special Tools .