Fluid Pump Cover Installation
WARNING: This page is about a different car, the 2010 GMC Sierra and 2010 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| 1 | A/Trans Fluid Pump Cover Assembly Tip: Align pump with guide pins on the torque dampener housing. |
| 2 | A/Trans Fluid Pump Cover Bolts M6 x1.0 x 45 (Qty: 18)
CAUTION:
Refer to Fastener Caution
. Procedure:: Tighten in sequence shown. Tighten: 9-13 N.m (80-115 lb in) |