LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1680 (Engine Mechanical - 6.6L (LMM) - Repair Instructions - Off Vehicle (1 Of 3)) >> Fan Pulley Removal

Fan Pulley Removal

WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Camshaft Position Sensor Electrical Connector
    GM1334862Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the camshaft position sensor connector.
    2. Fig 2: View Of Cooling Fan Pulley
    GM1334864Courtesy of GENERAL MOTORS CORP.
  2. Remove the cooling fan pulley bolts and nuts.
  3. Remove the cooling fan pulley.
    4. Fig 3: View Of Camshaft Position Sensor
    GM1334865Courtesy of GENERAL MOTORS CORP.
  4. Remove the camshaft position sensor retaining bolt.
  5. Remove the camshaft position sensor.
scientia non olet · About LEMON Manuals