Section 1670 (Engine Mechanical - 4.8L, 5.3L, 6.0L, 6.2L - Repair Instructions - Off Vehicle (2 Of 3))
WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Camshaft Position Actuator Solenoid Valve Inspection (On-Vehicle)
- Camshaft Position Actuator Solenoid Valve Inspection (Off-Vehicle)
- Valve Rocker Arm and Push Rod Cleaning and Inspection
- Valve Lifter and Guide Cleaning and Inspection
- Cylinder Head Disassemble
- Cylinder Head Cleaning and Inspection
- Valve Guide Reaming, and Valve and Seat Grinding
- Cylinder Head Assemble
- Oil Pump Disassemble
- Oil Pump Cleaning and Inspection
- Oil Pump Assemble
- Engine Front Cover Cleaning and Inspection
- Crankshaft Rear Oil Seal Housing Cleaning and Inspection
- Engine Block Valley Cover Cleaning and Inspection
- Valve Lifter Oil Manifold Cleaning and Inspection
- Valve Rocker Arm Cover Cleaning and Inspection
- Oil Pan Cleaning and Inspection
- Intake Manifold Cleaning and Inspection
- Exhaust Manifold Cleaning and Inspection
- Engine Coolant Air Bleed Pipe and Hole Cover Cleaning and Inspection
- Water Pump Cleaning and Inspection
- Thread Repair
- Service Prior to Assembly
- Engine Block Plug Installation
- Crankshaft and Bearing Installation
- Piston, Connecting Rod, and Bearing Installation (Except L9H and L94)
- Piston, Connecting Rod, and Bearing Installation (L9H and L94)
- Camshaft Installation
- Timing Chain, Crankshaft Sprocket, Camshaft Position Actuator, and Solenoid Valve Installation
- Oil Pump, Screen and Crankshaft Oil Deflector Installation
- Crankshaft Rear Oil Seal Housing Installation (Without Seal in Housing)
- Crankshaft Rear Oil Seal Housing Installation (With Seal in Housing)
- Crankshaft Rear Oil Seal Installation
- Engine Front Cover Installation
- Crankshaft Front Oil Seal Installation
- Oil Pan Installation
- Oil Filter Installation
- Valve Lifter Installation (Without Active Fuel Management)
- Valve Lifter Installation (With Active Fuel Management)
- Cylinder Head Installation - Left Side
- Cylinder Head Installation - Right Side
- Valve Rocker Arm and Push Rod Installation
- Valve Rocker Arm Cover Installation - Left Side
- Valve Rocker Arm Cover Installation - Right Side
- Engine Block Valley Cover Installation
- Valve Lifter Oil Filter Installation
- Valve Lifter Oil Manifold Installation
- Engine Coolant Air Bleed Pipe and Hole Cover Installation
- Intake Manifold Installation (Without Active Fuel Management)
- Intake Manifold Installation (With Active Fuel Management)