LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1667 (Engine Mechanical - 4.8L, 5.3L, 6.0L, 6.2L - Repair Instructions - On Vehicle) >> Camshaft Position Sensor Replacement (Without Actuator)

Camshaft Position Sensor Replacement (Without Actuator)

WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Camshaft Position Sensor (Without Actuator)
GM2491402Courtesy of GENERAL MOTORS COMPANY
Camshaft Position Sensor Replacement (Without Actuator)

Callout Component Name
1 Camshaft Position Sensor Fastener (Qty: 2)
CAUTION:

Refer to FASTENER CAUTION .


Tighten 
12 N.m (106 lb in)
2 Camshaft Position Sensor
Procedure 
Disconnect the electrical connectors.
scientia non olet · About LEMON Manuals