LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1660 (Engine Control System & Fuel System - 6.6L (LMM) - DTC P02E8 To DTC P1247) >> DTC P0652 or P0653 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. The engine starts and runs.
  2. Observe the 5-Volt Reference 2 Circuit Status parameter with a scan tool. The parameter should display OK.
  3. Engine running, observe the DTC information with a scan tool. DTCs P0652 or P0653 should not set.
  4. Operate the vehicle within the Conditions for Running the DTC. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records data.