LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1643 (Engine Control System & Fuel System - 4.8L, 5.3L, 6.0L, 6.2L - DTC P0010 To DTC P0232/DTC P025A) >> DTC P0112 or P0113 (Without Heavy Duty L96) >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, and 2010 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Engine idling, observe the scan tool IAT Sensor parameter. The reading should be between -38 to +149°C (-36 to +300F) depending on the current ambient temperature and the vehicle operating conditions.
  2. Operate the vehicle within the Conditions for Running the DTC to verify that the DTC does not reset. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records data.
scientia non olet · About LEMON Manuals