Circuit/System Description
WARNING: This page is about a different car, the 2010 GMC Sierra and 2010 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
The engine control module (ECM) has 2 internal 5 V reference busses called 5 V reference 1 and 5 V reference 2. Each reference bus provides 5 V reference circuits for more than one sensor. Therefore, a fault condition on one 5 V reference circuit will affect the other 5 V reference circuits connected to that reference bus. The ECM monitors the voltage on the 5 V reference busses.