LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1632 (Steering Linkage) >> Repair Instructions >> Pitman Arm Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the steering gear. Refer to Steering Gear Replacement (Hydraulic Rack and Pinion) or Steering Gear Replacement (Recirculating Ball Without LMM) or Steering Gear Replacement (HP2) or Steering Gear Replacement (LMM) .
  2. Place the steering gear into a vise.
    3. Fig 1: Identifying Pitman Arm Nut & Washer
    GM1862648Courtesy of GENERAL MOTORS CORP.
  3. Remove the pitman arm nut (1) and washer (2).
    4. Fig 2: Removing Pitman Arm From Pitman Arm Shaft
    GM398243Courtesy of GENERAL MOTORS CORP.
  4. Remove the pitman arm from the pitman arm shaft using puller J 6632-01  or puller J 29107-A  . See Special Tools .
scientia non olet · About LEMON Manuals