LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1628 (Engine Mechanical - 6.6L (LMM) - Diagnostic Information And Procedures) >> Diagnostic Information and Procedures >> Engine Oil Level Sensor Diagnosis >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Verify proper engine oil level. Add oil as necessary.
  2. Ignition ON, observe the scan tool Engine Oil Level parameter. The reading should be OK and change to low when the oil level sensor/switch harness connector is disconnected.