LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1627 (Engine Mechanical - Hybrid (Hp2) 6.0L (LZ1)) >> Repair Instructions - On Vehicle >> Crankshaft Front Oil Seal Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2010 GMC Sierra and 2010 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Oil Seal
    GM1658279Courtesy of GENERAL MOTORS CORP.
  1. Remove the crankshaft balancer. Refer to Crankshaft Balancer Replacement .
  2. Remove the crankshaft front oil seal (140) from the front cover.
scientia non olet · About LEMON Manuals