Piston, Connecting Rod, and Bearing Installation: Notes
WARNING: This page is about a different car, the 2010 GMC Sierra and 2010 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools
- J 8037: Ring Compressor
- J 8087: Cylinder Bore Gauge
- J 45059: Angle Meter
For equivalent regional tools, refer to Special Tools .
NOTE:
Powdered metal connecting rods and rod bearing caps are NOT interchangeable, and must be assembled with the mating surfaces properly oriented and aligned. Piston, piston pin, and connecting rod are to be serviced as an assembly.