LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1622 (Front Drive Axle) >> Repair Instructions >> Front Drive Axle Clutch Fork Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Inner Axle Shaft Housing & Clutch Fork Assembly - Front Drive Axle
    GM890589Courtesy of GENERAL MOTORS CORP.
  1. Install the clutch fork inner spring into the differential carrier case assembly, if necessary.
  2. Install the clutch fork assembly (2) into the inner axle shaft housing (1).
  3. Install the inner axle shaft and housing assembly. Refer to Front Drive Axle Inner Shaft and Inner Shaft Housing Replacement (8.25 F4WD Axle)  or Front Drive Axle Inner Shaft and Inner Shaft Housing Replacement (8.25 S4WD and 9.25 Axles) .
scientia non olet · About LEMON Manuals