Circuit/System Verification
WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Ignition ON, with a scan tool perform the Lamp Test for the instrument panel cluster (IPC) and observe the cruise control indicator.
- If the cruise control indicator illuminates during the test, replace the ECM.
- If the cruise control indicator does not illuminates during the test or remains illuminated at all times, replace the IPC.