LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1613 (Automatic Transmission - ALLISON - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Torque Converter Housing Bolt Seal Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Torque Converter Housing Bolts
    GM659006Courtesy of GENERAL MOTORS CORP.
  1. Remove the torque converter from the transmission. Refer to Torque Converter Replacement .
  2. Remove any of the 10 bolts (1), bolt heads shaded, where leakage at the bolt head is suspected.
    3. NOTE: The bolts (1) have a removable seal under the flanged head.
  3. Remove and discard seals from bolts removed.
scientia non olet · About LEMON Manuals