Disc Brakes Torque Specifications
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2003 GMC Savana Special, 2003 GMC Savana Camper Special, 2003 GMC Savana, 2003 Chevrolet RV Cutaway, and 2003 Chevrolet Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
DISC BRAKES TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) | |||
|---|---|---|---|---|
| Backing Plate Bolts | ||||
| Dual Rear Wheels | (1) 118 (160) | |||
| Single Rear Wheels | 100 (135) | |||
| Booster Cover Bolts | 20 (30) | |||
| Brake Hose-To-Caliper Bolt | ||||
| Front & Rear | 32 (44) | |||
| Pedal Retaining Nuts | 24 (33) | |||
| Brake Pipe Fittings | 18 (25) | |||
| Brake Pipe Fittings-To-Combination Valve | 18 (25) | |||
| Brake Pipes-To-Brake Master Cylinder | 18 (25) | |||
| Brake Pipes-To-EBCM Unit | 15 (20) | |||
| Caliper Guide Pin Bolt - Rear | ||||
| 7200 Lbs. GVWR | 31 (42) | |||
| Except 7200 Lbs. GVWR | 80 (108) | |||
| Caliper Guide Pin Bolt - Front | 80 (108) | |||
| Caliper Mounting Bracket-To-Backing Plate - Rear | ||||
| 7200 Lbs. GVWR | 148 (200) | |||
| Except 7200 Lbs. GVWR | 221 (300) | |||
| Caliper Mounting Bracket-To-Knuckle - Front | ||||
| 7200 Lbs. GVWR | 129 (175) | |||
| Except 7200 Lbs. GVWR | 221 (300) | |||
| EHCU Bracket-To-Frame Bolt | 18 (25) | |||
| EHCU Shield Mounting Bolt/Nut | 18 (25) | |||
| Fluid Flow Alarm Switch Fitting | 26 (35) | |||
| Front & Rear Brake Pipes-To-Brake Master Cylinder | 18 (25) | |||
| Front Brake Hose-To-Front Brake Caliper | 32 (44) | |||
| Front Brake Lines-To-BPMV | 18 (25) | |||
| Front Brake Pipes-To-Brake Hoses | 18 (25) | |||
| Front Wheel Speed Sensor Mounting Bolt | 13 (18) | |||
| Lever Retaining Nuts | 18 (25) | |||
| Master Cylinder Brake Lines-To-BPMV | 18 (25) | |||
| Master Cylinder Mounting Nuts | 27 (36) | |||
| Negative Battery Terminal | 11 (15) | |||
| Power Brake Booster Retaining Nut | 26 (36) | |||
| Power Steering Hoses-To-Power Brake Booster | 24 (33) | |||
| Rear Brake Hose-To-Rear Caliper | 32 (44) | |||
| Rear Brake Line-To-BPMV | 18 (25) | |||
| Rear Brake Pipes-To-Brake Hoses | 18 (25) | |||
| Upper Brake Pedal Bolt | 24 (33) | |||
| Wheel Hub Extension Nut | 96 (130) | |||
| INCH Lbs. (N.m) | ||||
| Brake Caliper Bleeder Valve (Front) | 115 (13) | |||
| Brake Pressure Modulator Bleeder Valves | 80 (9) | |||
| Cable Guide Bolts | 115 (13) | |||
| Caliper Bleed Screw | 106 (12) | |||
| Combination Valve Bolt | 88 (10) | |||
| Combination Valve Shield Retaining Bolt | 106 (12) | |||
| EBCM-To-BPMV Torx Bolt | 44 (5) | |||
| EHCU-To-Bracket | 80 (9) | |||
| Flow Alarm Switch Clamp | 27 (3) | |||
| Fluid Pressure Alarm Switch-To-Hydraulic Line | 106 (12) | |||
| Front Brake Hose Retaining Bracket | 88 (10) | |||
| Front Brake Hose Retaining Bracket-To-Upper Control Arm | 88 (10) | |||
| Indicator Switch Retaining Screw | 35 (4) | |||
| Rear Brake Hose Retainer-To-Frame Mounted Bracket | 88 (10) | |||
| Park Brake Release Cable Bolt | 89 (10) | |||
| Rear Park Brake Cable-To-Axle Bolt | 115 (13) | |||
| Return Port Fitting | 88 (10) | |||
| Wheel Cylinder Bleeder Valve (Rear) | 97 (11) | |||
|
||||