Disc Brakes Service Specifications
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2003 GMC Savana Special, 2003 GMC Savana Camper Special, 2003 GMC Savana, 2003 Chevrolet RV Cutaway, and 2003 Chevrolet Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
DISC BRAKES SPECIFICATIONS
| Application | In. (mm) | |||
|---|---|---|---|---|
| Front Brake (7200 Lbs. GVWR) | ||||
| Rotor Discard Thickness (1) | 1.083 (27.50) | |||
| Rotor Minimum Allowable Thickness After Refinish | 1.102 (28.00) | |||
| Rotor Thickness (NEW) | 1.142 (29.00) | |||
| Rotor Maximum Allowable Lateral Runout | 0.005 (0.13) | |||
| Rotor Maximum Allowable Scoring | 0.059 (1.50) | |||
| Rotor Maximum Allowable Thickness Variation | 0.001 (0.025) | |||
| Front Brake (9900 Lbs. GVWR) | ||||
| Rotor Discard Thickness (1) | 1.437 (36.50) | |||
| Rotor Minimum Allowable Thickness After Refinish | 1.457 (37.00) | |||
| Rotor Thickness (NEW) | 1.496 (38.00) | |||
| Rotor Maximum Allowable Lateral Runout | 0.005 (0.13) | |||
| Rotor Maximum Allowable Scoring | 0.059 (1.50) | |||
| Rotor Maximum Allowable Thickness Variation | 0.001 (0.025) | |||
| Front Brake (12,300 Lbs. GVWR) | ||||
| Rotor Discard Thickness (1) | 1.437 (36.50) | |||
| Rotor Minimum Allowable Thickness After Refinish | 1.457 (37.00) | |||
| Rotor Thickness (NEW) | 1.496 (38.00) | |||
| Rotor Maximum Allowable Lateral Runout | 0.005 (0.13) | |||
| Rotor Maximum Allowable Scoring | 0.059 (1.50) | |||
| Rotor Maximum Allowable Thickness Variation | 0.001 (0.025) | |||
| Rear Brake (7200 Lbs. GVWR) | ||||
| Rotor Discard Thickness (1) | 1.122 (28.50) | |||
| Rotor Minimum Allowable Thickness After Refinish | 1.142 (29.00) | |||
| Rotor Thickness (NEW) | 1.181 (30.00) | |||
| Rotor Maximum Allowable Lateral Runout | 0.005 (0.13) | |||
| Rotor Maximum Allowable Scoring | 0.059 (1.50) | |||
| Rotor Maximum Allowable Thickness Variation | 0.001 (0.025) | |||
| Rear Brake (9900 Lbs. GVWR) | ||||
| Rotor Discard Thickness (1) | 1.083 (27.50) | |||
| Rotor Minimum Allowable Thickness After Refinish | 1.102 (28.00) | |||
| Rotor Thickness (NEW) | 1.142 (29.00) | |||
| Rotor Maximum Allowable Lateral Runout | 0.005 (0.13) | |||
| Rotor Maximum Allowable Scoring | 0.059 (1.50) | |||
| Rotor Maximum Allowable Thickness Variation | 0.001 (0.03) | |||
| Rear Brake (12,300 Lbs. GVWR) | ||||
| Rotor Discard Thickness (1) | 1.122 (28.50) | |||
| Rotor Minimum Allowable Thickness After Refinish | 1.142 (29.00) | |||
| Rotor Thickness (NEW) | 1.181 (30.00) | |||
| Rotor Maximum Allowable Lateral Runout | 0.005 (0.13) | |||
| Rotor Maximum Allowable Scoring | 0.059 (1.50) | |||
| Rotor Maximum Allowable Thickness Variation | 0.001 (0.025) | |||
|
||||