LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1606 (Transfer Case - Mp 3023/3024-NQH) >> Diagnostic Information and Procedures >> DTC C0379 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2010 GMC Sierra and 2010 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Key ON, engine OFF. Parking brake applied. Transmission in Neutral. Install a scan tool.
  2. While monitoring the Front Axle Actuator parameter of the Data Display function on the scan tool, shift the vehicle into 4WD HI. The Front Axle Actuator parameter should display Engaged. You should also be able to hear the axle actuator engaging.
  3. Shift the vehicle into 2WD HI. The Front Axle Actuator parameter should display Disengaged. You should also be able to hear the axle actuator disengaging.
scientia non olet · About LEMON Manuals