LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1606 (Transfer Case - Mp 3023/3024-NQH) >> Diagnostic Information and Procedures >> DTC B2725 >> Circuit/System Description

Circuit/System Description

WARNING: This page is about a different car, the 2010 GMC Sierra and 2010 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.

The active transfer case mode switch circuit consists of 5 modes. The transfer case shift control module (TCCM) supplies a regulated 5 volts to the switch through the 5-volt reference circuit. The current travels through the specific resistor of the currently selected mode - each mode has its own resistor. The current is then returned to the TCCM through the switch signal circuit.

The TCCM continuously monitors the switch signal circuit to determine whether a mode change has been requested by the driver.

The NQH transfer case has the following 5 modes:

scientia non olet · About LEMON Manuals