Transfer Case Holding Fixture Installation

WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Transfer Case Holding Fixture

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	Transfer Case Nuts Special Tools: J 45759: Assembly Fixture For equivalent regional tools, refer to Special Tools .
2	Transfer Case Special Tools: J 3289-20: Holding Fixture
3	Pivot Pin Tip: Always secure with the pivot pin after rotating. The transfer case can be rotated 360 degrees to facilitate repair.