Front Output Shaft Assembly Removal
WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Courtesy of GENERAL MOTORS CORP.
| Callout |
Component Name |
| 1 |
Transfer Case Front Case Half
Tip:
Place the front case half on an arbor press. |
| 2 |
Transfer Case Front Output Shaft Assembly
Tip:
Press the front output shaft assembly from the front case half using an arbor press or soft-face hammer. |
| 3 |
Transfer Case Front Output Shaft Seal |