LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1597 (Hybrid Energy Storage System) >> Diagnostic Information and Procedures >> DTC P0A95 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2010 GMC Sierra and 2010 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Verify that DTC P1A20 or P1AE7 is not set, and that no drive motor generator control module DTCs are set.
  2. Ignition ON, observe the scan tool Hybrid Battery 11 parameter. The reading should be between 10-19 V.