LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1593 (Trailer Brake Control System) >> Diagnostic Information and Procedures >> DTC C0880, C0890, C1115, C1116, C1117, or C1118 (Gasoline Without LY6) >> Circuit/System Description

Circuit/System Description

WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

The fuel pump/trailer brake control module system has a control panel with the trailer gain and manual apply switches. The switches are located on the instrument panel to the left of the steering column. The control panel and switches allows you to adjust the amount of output, referred to as trailer gain, available to the electric trailer brakes and allows you to manually apply the trailer brakes. The Trailer Brake Control Panel, and switches are used along with the Trailer Brake Display Page on the Driver Information Center to adjust and display power output to the trailer brakes.

scientia non olet · About LEMON Manuals