Circuit/System Description
WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
The brake switch is hard wired to the trailer brake control module (TBCM). The body control module (BCM) sends a brake switch status serial data message to the trailer brake control module. The trailer brake control module compares the states of the brake switch signal to the serial data message after a master cylinder brake pressure sensor threshold is exceeded. If the brake switch signal and the serial data message are not in agreement or if the serial data message is not valid, a DTC will set and the trailer brake control system will be disabled.