LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1593 (Trailer Brake Control System) >> Description and Operation >> Trailer Brake Controls Description and Operation >> Built Prior to 2010

Built Prior to 2010

WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

This vehicle may be equipped with a Trailer Brake Control Module system for electric trailer brakes. The power output to the trailer brakes is based on the amount of brake pressure being applied in the vehicle's brake system. The available power output to the trailer brakes can be adjusted to a wide range of trailering situations.

NOTE: Connecting a trailer that is not compatible with the trailer brake system may result in reduced or complete loss of trailer braking. There may be an increase in stopping distance or trailer instability which could result in personal injury or damage to your vehicle, trailer, or other property. An aftermarket controller may be available for use with trailers with surge, air or electric-over-hydraulic trailer brake systems. To determine the type of brakes on your trailer and the availability of controllers, check with your trailer manufacturer or dealer. Do not power-up an aftermarket controller with the factory brake controller at the same time.

The vehicle is equipped with the following trailer braking components:

scientia non olet · About LEMON Manuals