LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1592 (Wheel Drive Shafts) >> Repair Instructions >> Wheel Drive Shaft Replacement (1500) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the tire and wheel. Refer to Tire and Wheel Removal and Installation .
  3. Remove the front axle hub cap from the wheel bearing, if equipped.
    4. Fig 1: Loosening/Tightening Hub Nut
    GM1932Courtesy of GENERAL MOTORS CORP.
  4. Insert a drift or large screwdriver through the brake caliper into one of the brake rotor vanes in order to prevent the wheel drive shaft from turning.
    5. Fig 2: View Of Hub Nut & Washer
    GM1736696Courtesy of GENERAL MOTORS CORP.
    NOTE: DO NOT reuse the wheel drive shaft nut, use a NEW nut only.
  5. Remove the nut (1) and washer (2) from the hub.
    6. Fig 3: Pressing Wheel Drive Shaft From Hub
    GM870456Courtesy of GENERAL MOTORS CORP.
  6. Using the J-45859:  Axle Remover, remove the wheel drive shaft from the hub.
    7. Fig 4: View Of Drive Flange & Retaining Bolts
    GM1736718Courtesy of GENERAL MOTORS CORP.
  7. Remove the retaining bolts from the drive flange.
  8. Remove the stabilizer shaft link from the lower control arm. Refer to Stabilizer Shaft Replacement (1500) or Stabilizer Shaft Replacement (2500, 3500) .
  9. Remove the shock module. Refer to Shock Absorber and Spring Assembly Replacement .
    10. Fig 5: View Of Wheel Drive Shaft
    GM1736759Courtesy of GENERAL MOTORS CORP.
  10. Remove the wheel drive shaft through the lower control arm opening.
  11. Remove all dirt and debris from the splines on the wheel hub/bearing.
scientia non olet · About LEMON Manuals