LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1591 (Power Steering System) >> Repair Instructions >> Power Steering Wiring Harness Extension Harness Replacement (HP2) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    IMPORTANT: The power steering wiring harness extension harness is not repairable. Only replace the harness and never attempt to repair it.
    IMPORTANT: The wiring harness protective cover is intended to keep the wiring harness connectors contaminant free. Do not remove the protective cover from the power steering wiring harness extension harness connectors until the harness has been routed to the correct position.
  1. Remove the power steering assist motor. Refer to Power Steering Assist Motor Replacement .
  2. Mark the position and directional orientation of every fastener on the two harnesses before separating them.
  3. Separate the power steering wiring harness extension harness from the power steering assist motor wiring harness.
scientia non olet · About LEMON Manuals