Removal Procedure
WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Place drain pans under the vehicle as needed.
- Remove as much power steering fluid from the power steering fluid reservoir as possible.
- Disconnect the power brake booster outlet hose (1) from the power brake booster (2).
- Disconnect the power brake booster outlet hose (1) from the power steering fluid reservoir (3).
- Remove the power brake booster outlet hose (1) from the vehicle.
CAUTION:
Refer to Power Steering Hose Disconnected Caution
.