LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1591 (Power Steering System) >> Diagnostic Information and Procedures >> DTC C056E >> Circuit/System Description

Circuit/System Description

WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

After replacement of the power steering control module (PSCM), the PSCM must be configured with the proper tuning profile using the service programming system (SPS).

After replacement of the PSCM, power steering motor, or steering gear, the steering position/torque sensor calibration procedure must be performed.

scientia non olet · About LEMON Manuals