LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1589 (Drum Brake System) >> Repair Instructions >> Brake Drum Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using the J-42450-A:  Wheel Hub Resurfacing Kit, remove any corrosion from the rear axle flange contact surface.
    2. Fig 1: View Of Brake Drum
    GM2178335Courtesy of GENERAL MOTORS CORP.
  2. Install the brake drum (1).
  3. Adjust the drum brakes. Refer to Drum Brake Adjustment .
  4. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
scientia non olet · About LEMON Manuals