Installation Procedure
WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Install the park brake cable guide to the park brake cable.
- Install the park brake cable guide.
- Install the park brake cable guide bolt to the frame and tighten to 12 N.m (106 lb in).
- Lower the vehicle.
CAUTION:
Refer to Fastener Caution
.