Cable Tension Adjustment
WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Position a sheet of ordinary printer or copier paper between the park brake apply lever and the disc brake backing plate on the RH side of the vehicle.
- Tighten the park brake cable adjusting nut until the paper inserted between the park brake apply lever and the backing plate slips out.
- Loosen the adjustment nut 1 full turn.