LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1587 (Front Suspension System) >> Repair Instructions >> Jounce Bumper Replacement (2500 Series) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, and 2010 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Jounce Bumper Stud & Nut
    GM348561Courtesy of GENERAL MOTORS CORP.
  1. Install the jounce bumper.
    2. CAUTION: Refer to Fastener Caution .
  2. Install the nut to the jounce bumper stud and tighten to 30 N.m (22 lb ft).
  3. Install the tire and wheel. Refer to Tire and Wheel Removal and Installation .
  4. Lower the vehicle.
scientia non olet · About LEMON Manuals