LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1585 (Rear Drive Axle) >> Repair Instructions >> Shims Inspection

Shims Inspection

WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
  • The original cast iron production shims can be removed and re-used. If the cast iron shims show signs of excessive wear or damage, they must be replaced with service shims and spacers.
  • If service shims were previously installed, the shims can be reused.

Inspect the shims for cracks and chips. Replace the damaged shims.

scientia non olet · About LEMON Manuals