LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1583 (Hybrid Engine Electrical System) >> Diagnostic Information and Procedures >> DTC P0AFB >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2010 GMC Sierra and 2010 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Verify that no hybrid powertrain control module (HPCM) DTCs are set due to high battery voltage.
  2. Engine running or autostop, observe the scan tool ACCM High Battery Voltage parameter. The reading should be between 225 V and 380 V.
    • If greater than the specified range, replace the ACCM.
scientia non olet · About LEMON Manuals