Installation Procedure
WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Install the front side door heater switch assembly (2).
- Install the front side door heater switch fasteners and tighten to 2 N.m (18 lb in).
- Connect the electrical connector.
- Install the door trim panel. Refer to Front Side Door Trim Panel Replacement (SLT, A95) or Front Side Door Trim Panel Replacement (Except YE9 or SLT) .
CAUTION:
Refer to Fastener Caution
.