Driver or Passenger Seat Cushion Ventilation Heating and Cooling Blower Replacement (Denali with KB6)
WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| Preliminary Procedure: Remove the front seat. Refer to Front Seat Replacement - Bucket . |
|
| 1 | Front Seat Adjuster Outer Finish Cover Refer to Front Seat Cushion Outer Trim Panel Replacement (Power) or Front Seat Cushion Outer Trim Panel Replacement (Manual) . |
| 2 | Front Seat Adjuster Inner Finish Cover Refer to Front Seat Cushion Inner Trim Panel Replacement . |
| 3 | Front Seat Riser Finish Cover Procedure: Pull rearward to disengage the cover from the seat riser. |
| 4 | Seat Cushion Cover and Pad Refer to Seat Cushion Trim Cover and Pad Replacement . |
| 5 | Front Seat Adjuster Assembly Refer to Front Seat Adjuster Replacement (Power) . |
| 6 | Seat Cushion Blower Nuts (Qty: 3)
CAUTION:
Refer to Fastener Caution
.
Tighten: 3 N.m (25 lb in) |
| 7 | Seat Cushion Blower Procedure: Disconnect the electrical connector. |