LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1576 (Hydraulic Brake System) >> Diagnostic Information and Procedures >> DTC C1100 >> Circuit/System Description

Circuit/System Description

WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

The electronic brake control module (EBCM) provides a 5 V reference circuit to the brake booster vacuum sensor and the steering angle sensor. The brake booster vacuum sensor converts the change in vacuum levels in the brake booster into a signal voltage ranging from 0.13 - 3.30 V and is monitored by EBCM.

scientia non olet · About LEMON Manuals