Removal & Installation

WARNING: This page is about a different car, the 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, 2003 Chevrolet Silverado, and 2003 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Before proceeding, see AIR BAG SAFETY PRECAUTIONS . Disconnect applicable under seat electrical connectors. Remove seat bolts and nuts. Remove seat from vehicle.
Disconnect electrical connector from SPS. See Fig 1. Drill out rivets that retain SPS to seat track. Remove SPS.
To install, reverse removal procedure. Tighten seat mounting bolts and nuts to specification. See TORQUE SPECIFICATIONS .

Fig 1: Identifying Seat Position Switch (SPS)

Courtesy of GENERAL MOTORS CORP.