Installation Procedure
WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Install the tire and wheel assemblies. Refer to Tire and Wheel Removal and Installation .
- Install the center caps, if equipped.
- Lower the vehicle.
- Check the tire pressure. Refer to the tire placard and adjust the tire pressure as necessary.
- Perform the tire pressure sensor learn procedure, if equipped. Refer to Tire Pressure Indicator Sensor Learn .