Range Selector Lever Cable Bracket Replacement

WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Range Selector Lever Cable Bracket

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Apply the park brake. Shift the transmission into neutral. Raise the vehicle. Refer to Lifting and Jacking the Vehicle . Remove the transmission range selector cable from the range selector cable bracket. Refer to Range Selector Lever Cable Replacement .
1	Transmission Range Selector Cable Bracket Bolt (Qty: 2) CAUTION: Refer to Fastener Caution . Tighten: 25 N.m (18 lb ft)
2	Transmission Range Selector Cable Bracket

Callout

Component Name

Preliminary Procedures

Apply the park brake.
Shift the transmission into neutral.
Raise the vehicle. Refer to Lifting and Jacking the Vehicle .
Remove the transmission range selector cable from the range selector cable bracket. Refer to Range Selector Lever Cable Replacement .

Transmission Range Selector Cable Bracket Bolt (Qty: 2)

CAUTION: Refer to Fastener Caution .

Tighten: 25 N.m (18 lb ft)

Transmission Range Selector Cable Bracket