LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1563 (Engine Control System & Fuel System - 4.3L - Repair Instructions) >> Repair Instructions >> Fuel Tank Pressure Sensor Replacement (Regular Cab with 26 Gallon Tank) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2010 GMC Sierra and 2010 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Fuel Tank Pressure Sensor
    GM1854511Courtesy of GENERAL MOTORS CORP.
  1. Remove the fuel tank. Refer to Fuel Tank Replacement (Regular Cab w/26 Gal Tank)  or Fuel Tank Replacement (Extended Cab w/26 Gal Tank)  or Fuel Tank Replacement (Regular Cab w/34 Gal Tank) .
  2. Remove the fuel tank pressure sensor by pulling straight up using a slight rocking motion.
scientia non olet · About LEMON Manuals