LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1562 (Frame And Underbody) >> Repair Instructions >> Trailer Hitch Replacement (Light Duty) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Trailer Wiring & Receptacle
    GM1987436Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the trailer wiring harness connector (3) from the trailer wiring recepticle (4).
  2. Remove the retainers (1) securing the trailer wiring harness (2) to the hitch platform.
    3. Fig 2: Trailer Hitch & Components
    GM1987435Courtesy of GENERAL MOTORS CORP.
  3. Remove the hitch platform bolts (5) from the bumper weld nuts (4).
  4. Remove the nuts (7) and bolts (1) securing the hitch platform to the frame rails.
  5. Remove the hitch platform bolts (6) from the frame weld nuts (2).
  6. Remove the hitch platform from the vehicle.
scientia non olet · About LEMON Manuals