Underhood Electrical Center or Junction Block Bracket Replacement
WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| Preliminary Procedure: Remove the underhood electrical center/junction block. Refer to Underhood Electrical Center or Junction Block Replacement . |
|
| 1 | Underhood Electrical Center/Junction Block Bracket Screws (Qty: 3)
CAUTION:
Refer to Fastener Caution
.
Tighten: 9 N.m (80 lb in) |
| 2 | Underhood Electrical Center/Junction Block Bracket |